Négy oldalán fűrészelt oszlop

Szőlőkaró fűrészelt és hasított

4 SIDE SAWN ROBINIA POLE
We produce the 4 side sawn poles according to the technological description. For the previous ask of customer we can turn asside from it. We can distinguish pointed and not pointed products. We produce this assortment from robinia.

TECHNOLOGICAL DESCRIPTION

Stage: Basically healthy timber. As well they are corresponding to size requirements the earlier produced sawn timber is allowed too, without restriction. Cracks and discoloration caused by the store are not considered as a wood-defect. Agricultural quality: every kind of wood defect, which does not influence the strength of the product, are allowed.
Barking: If there is wane we will bark by hand it.
Formulation: Square cross-section stake made with four side straight, parallel, perpendicular lengthwise saw cutting. Healthy pith is allowed without restriction. Wane is allowed till the 25 % of the product with not bigger width than the 25 % of the edge. (for example: If there is 40 x 40 mm, the width will be 10 mm )
Size tolerance in cross-section: saw-fresh +2/+3 mm, air-dried 0/+1 mm
Length: +/-10 mm till 150 cm, if the sawn timber is longer: +/- 20 mm. The stakes have to suit to the ordered sizes in the time of using.
Pointing: The stakes are pointed bluntly from four side on one end. The length of pointing is 15-25 cm, the ending is c. a. 1 x 1 cm. The stakes which are shorter than 150 cm the length of pointing is 12-15 cm, ending is c.a. 0,5 x 0,5 cm. The circle pointing is accepted equivalently.
Curvature: The degree of curvature is maximum 1 cm / runnung meter .(for example the string’s height of curvature of the 2 m length pole is max. 2 cm.
Length: According to the order with -1/+3 cm tolerance. The faces of poles have to be cut parallel to the lineshaft.
Knots: Healthy knots are allowed without limitation. Elements with rot or black knots are allowed till 2 cm diameter .
Packing: The product must be pack in undamaged, suited stage for loading with forklift.

VINE STAKES

In viticulture it is used like a pillar. We produce it according to the standard MSZ 08-0546, we apply it as an home standard. For the previous ask of customer we can turn asside from it. According this, we can distinguish stakes made for automatic planting and for planting by hand, and also we can distinguish slit and sawn, pointed and not pointed vine stakes. We produce this assortment from robinia.

TECHNOLOGICAL DESCRIPTION

Stage: Basically healthy timber. As well they are corresponding to size requirements the earlier produced products is allowed too, without limitation. Cracks and discoloration caused by the store are not considered as a wood-defect. Agricultural quality: wood-defect that does not influence the strength of the product, are allowed.
Barking: The stakes are barked to white by hand till sapwood ( but measuring with the sapwood ).
Formulation: Sectioned cross-section stake ( quarter, sixth, eight), not sharp-edged made from cylindrical made tree with two lengthwise cutting at least. Or irregular polygon cross-sectioned stake ( trapezium, deltaziom, pentagon, hexagon.) made with more lengthwise saw cutting. Repair cutting is allowed.
Cross-section: The cross-sections of traditional vine stakes are expressed with one range of size.
Pointing: The stakes are pointed bluntly from four side on one end. Length of pointing 15-25 cm, the ending is c.a. 0,5 x 0,5 cm.
Curvature: The degree of curvature is max. 2 cm / running meter. (for example the string’s height of curvature of the 2 cm length pole is max. 4 cm ). Repair cutting is allowed.
Length: According to order with -1/+3 cm tolerance. We do not transport differing length. The faces of poles have to be cut perpendicularly to the lineshaft.
Knots: Healthy knot is allowed without limitation, punky and black knots are allowed till 3 cm diameter.
Packing: The poles are packed into packages that can be moved with a fork-lift ( size: 115 x 115 cm cross-section, with 8 cm high foot under the package.) Different dimensions are slected in different packages. We put the following number of pieces from the cross-section into the unit-packages what have the same height, generally 115 x 115 cm cross-sectioned cross-pile.

Robinia Vin Pole

The vine poles are in the vine plantation, in the cordon built orchards these are appropriate for the strech of climbing or holding wires.We produce it according to standard MSZ 08-058, and the technical description. We use this standard as an nation standard. We can distinguish debarked and without bark, as well as pointed and not pointed poles. For the previous ask of customer we can turn asside from it.

TECHNOLOGICAL DESCRIPTION

Stage: Basically healthy timber. Wood-defects that do not influence the strength of the product are allowed without restriction. Cracks caused by the sun and discoloration are not considered as a wood-defect.
Barking: Partically debarked to white, knots are cut back up to the surface of the pole.
Formulation: The end of the pole is crowned if it is need and here we give the named diameter ( such as 8-10 cm9 from the diameter measured before crown.
Size tolerance: in length: +/- 10 mm till 150 cm, longer: +/- 20 mm. The poles have to suitable to the ordered size in the time of using.
Pointing: It depends on using. Generally, the ticker end has to be pointed from four sides in c.a. 12-15 cm length so that the size of the top is 5 x 5 -10 x 10 mm.
Curvature: The degree of curvature is max. 1 cm / running meter. ( for example the string’s height of curvature of the 2 m length pole is max. 2 cm ).
Length: According to the order with -1/+3 cn tolerance. The faces of poles have to be cut parallel to the lineshaft.
Knots: Healthy knots are allowed without limitation, Elements with rot and black knots are allowed till 2 cm diameter.
Packing: The poles are packed into packages that can be moved with a fork-lift ( size: 110 cm wide x 110-120 cm high with a 8 cm high foot under the package).Different dimensions are selected in different packages.

Robinia round pole

It is assortment for water and building purposes. We produce the pile wood according the customer’s requirements. There is debarked and in bark, pointed in thicker or thinner end on 2 or more side and not pointed pile wood, probably crowned.